3-In-1 Compact Dryer For PEEK PA
NAMING PRINCIPLE of 3-In-1 Compact Dryer
OCD – xx/xxxH
① ② ③
① Orste “Three-in-one” Compact Dryer
② Hopper Capacity (L)
③ Dehumidifying Air Quantity (m3/hr)
H: Honeycomb Rotor Type
Product Features of Compact Dehumidifying Dryer
1. The OCD compact dryers can be equipped with up to four fully insulated drying bins to suit the required total throughput.
2. OCD compact dryers are the most effective way of conditioning hygroscopic plastic granules for processing and removing surface moisture.
3. The use of corrosion resistant stainless steel ensures a long lifetime and avoids contamination of the plastic granules.
4. Transparent window design for filter makes it convenient to monitor the condition of filter.
5. Material-contact surface of hopper is specially made of dust-free mirror-like stainless steel, it is suitable for the production of optical lens or food standard plastic products production.
6. High-density return air filter ensures no contamination to the material in the conveying of materials.
7. For models below OCD-160/120H, air-cooling methods is applied, which ensures low energy-saving and convenient for movement.
Application of PA Dehumidifying Dryer
ORSTE “Optical” Dehumidifying Dryers provides the advantages of a consistent dew point and maximum energy efficiency. They combine the function of dehumidifying, drying and two-stage conveying into one compact machine, specified for the production of “optical class” and “food standard” products, such as lens, LGP, disposable lunch box etc. The quality desiccant honeycomb rotor provides continuous and constant low dew-point air which can be lower than -40 oC under ideal conditions.
Product Specification / Parameters 3-In-1 Compact Dryer
| Model OCD- | 20/40H | 40/40H | 80/80H | 120/80H | 160/120H | 230/120H | 300/200H | 450/200H | 600/400H | 750/400H |
| Drying System |
| Hopper Capacity (kg) | 12 | 25 | 50 | 75 | 100 | 150 | 200 | 300 | 400 | 500 |
| Drying Heating Power (kw) | 4 | 4 | 4 | 4 | 6 | 6 | 12 | 12 | 18 | 18 |
| Drying Blower Power (kw) | 0.4 | 0.4 | 0.7 | 0.7 | 0.7 | 0.7 | 1.5 | 1.5 | 3.75 | 3.75 |
| Dehumidifying System |
| Dehumidifying Air Quantity (m3/hr) | 40 | 40 | 80 | 80 | 120 | 120 | 200 | 200 | 400 | 400 |
| Regenerative Heater Power (kw) | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 5.4 | 5.4 | 7.2 | 7.2 |
| Regenerative Blower Power (kw) | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.4 | 0.4 | 0.75 | 0.75 |
| Feeding System |
| Feeding Blower Power(kw) | 0.75 | 0.75 | 1.1 | 1.1 | 1.1 | 1.1 | 1.5 | 1.5 | 2.2 | 2.2 |
| Dia. of Material Pipe (inch) | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Dia. of Return Air Pipe (inch) | 2 | 2 | 2 | 2 | 2.5 | 2.5 | 2.5 | 2.5 | 3 | 3 |
| OMH (L) | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 12 | 12 | 12 | 12 | 30 |
| OPH (L) | 3 | 3 | 3 | 3 | 3 | 7.5 | 7.5 | 7.5 | 12 | 12 |
| Dimension | H (mm) | 1490 | 1870 | 2010 | 2100 | 2260 | 2370 | 2370 | 2410 | 2520 | 2570 |
| W (mm) | 1000 | 1050 | 1180 | 1180 | 1340 | 1340 | 1440 | 1460 | 1645 | 1645 |
| D (mm) | 730 | 730 | 780 | 780 | 810 | 810 | 940 | 940 | 1145 | 1145 |
| Weight (kg) | 280 | 295 | 325 | 340 | 505 | 515 | 570 | 610 | 650 | 700 |
Product Details of Compact Dehumidifying Dryer
The above part is a dust collector, it is an important part for the machine if there is much dust in the plastic materials. It can remove most of the dust like substance in the plastic and greatly improve the service lifespan of the machine.
The above part is an oil removing device. If the plastic material contains some oil-like substance, the oil-like substance can go back to the honeycomb rotor which can block the holes in it. Then the drying effect and performance of the machine will be reduced a lot. So in this circumtance, the oil removing device is needed.
Note of Maintenance
1) Turn off the main switch and control switch and unplug the cord from power supply before service and maintenance.
2) Be sure not to modify electrical wiring or reassemble the electrical components inside of the control box.
3) Always refer to the electrical diagram of this manual to check and maintain the electrical wiring problems.
4) Service and maintenance of the electrical parts should only be carried out by qualified electricians.
Filter Cleaning
Please periodically clean the dust on the air filters, once per week.
Cleaning steps:
1) Take out the air filter carefully.
2) Blow off the dust on the air filter screen and the cover with pressure air.
3) Wipe off the barrel wall of air filter with dishcloth.
4) After cleaning, place all parts in reversed order carefully.
Note!
Do not let any impurities fall into filter container.
Product Tags:
|
|
3 In 1 Compact Plastic Dehumidifying Dryer Machine OCD-120/80H For PEEK PA Images
|
